Faqs

    Compatibility

  • Can I start with any Harley-Davidson Touring bike?

  • Yes, any 2009-Current Touring model can be converted into a Naked Series bike.
  • Can I run turn signals with the Duro tracker Nacelle?

  • Yes, you can run OEM or any aftermarket Touring bike style.
  • Do I have to change the wheels to use the Naked Series conversion kits?

  • No, you can run stock wheels
  • Can I run an inverted front suspension with the Naked Series conversion kit?

  • Yes, you can. We cannot guarantee our nacelles will fit up perfectly with them, but we are confident it would only be a minor adjustment if necessary to make the part fit.
  • Do I have to build the complete kit, or can I add as I go?

  • Our parts a designed to work on a stock bagger. You can buy 1 part at a time and gradually build a Naked Series conversion, or just use your favorite parts to build your bike – your way.
  • Can I put my saddlebags back on for trips after using the Naked Series conversion kits?

  • Absolutely, our rear sub-frame un-bolts in minutes and you can put your stock sub-frame rear fender and saddlebags back on for that long weekend run. It would take about an hour to convert it back to bagger.
  • Does your chin spoiler work with stock crash bar?

  • We don’t currently offer a production version to work with the crash bar, but with one cut across the top it will work. You will need to cut about 4” off the top and drill a ¼” hole for top center mount. We have done them for customer bikes.
  • Will the Naked Series front fender work with aftermarket front ends?

  • Yes, as long as it’s setup for stock style fender mounts. If not, the fender can easily be modified.

    Tools & Assembly

  • Do I need to be a builder or professional to install the Naked Series kits?

  • No, we built this kit for limited tool and mechanical knowledge. The kit is truly a bolt-on kit.
  • Do I need any special tools to install the Naked Series conversion kits?

  • A typical set of home mechanic tools will be all you need.
  • Do I have to change the wheels to use the Naked Series conversion kits?

  • No, you can use a car jack and a piece of wood to lift the bike. We recommend putting on a block of wood after changing the rear sub frame and shocks This will keep the bike up right and stable during the installation of the kit.

    Custom Builds

  • Can I buy a complete Naked Series bike from EPIC?

  • Yes, we can provide you a base bike (new or used) and do the conversion for you. Or you can bring us a donor bike and we’ll install the conversion kit for you.
  • Do you offer renderings or mock-ups of the bikes before building?

  • Yes, we offer rendering services for your approval prior to the bike build.
  • How much does a donor bike cost?

  • You have a few options. Salvaged bikes sell anywhere from $1500-$5000. You can buy a clean used 2009 -2013 touring model between $5,000-$10,000. 2014 up will range $10,000-$20,000 Or you can purchase a brand-new bike from the dealership.

    Warranty & Service

  • Will my bike’s warranty be voided by using the Naked Series conversion kits or parts?

  • No. Your warranty will not be affected as our kits do not jeopardize the stock bike. Our kits are completely bolt-on with no permanent modifications to the frame.
  • Will the dealerships still service and work on my bike?

  • Yes.
  • Do you have installing dealers for Naked Series kits and parts?

  • Yes. We have a network of authorized dealers and service facilities all over the world. Please contact us and we can place you with the nearest installing dealer.

    Conversion Kits

  • Can I start with any Harley-Davidson Touring bike for the conversion?

  • Yes, any 2009-Current Touring model can be converted into a Naked Series bike.
  • Are the Naked Series kits available for the 2008-down Harley-Davidson Touring bikes?

  • We will have the kits available in the near future. Many of our other parts also work on the older bikes.
  • 3 Do I need to be a builder or professional to install the Naked Series kits?

  • No, we built this kit for limited tool and mechanical knowledge. The kit is truly a bolt-on kit.
  • Do I have to change the wheels to use the Naked Series conversion kits?

  • No, you can run stock wheels.
  • Do I need any special tools to install the Naked Series conversion kits?

  • A typical set of home mechanic tools will be all you need.
  • Do I need a motorcycle lift to install a Naked Series conversion kit?

  • No, you can use a car jack and a piece of wood to lift the bike. We recommend putting on a block of wood after changing the rear sub frame and shocks.This will keep the bike up right and stable during the installation of the kit.
  • Do I need new brake lines when installing a Naked Series conversion kit?

  • You don’t need new brake lines but, we do recommend swapping out with the snipper lines. This will hide the lines and give the bike a much cleaner look.
  • Do the body parts come painted?

  • No,the body parts come in a high-build primer which allows you to mock-up the parts and dial in to your liking and paint specifications. Need help finding a quality painter to give your custom ride the perfect finish? Give us a call! We have a network of qualified painters ready to go.
  • Can I run side mount or custom turn signals on the rear of bike when installing a Naked Series kit?

  • Yes, you have many aftermarket companies that make cool turn signals.
  • Do you offer painted parts?

  • Yes, we can provide a custom paint set for an additional fee. Please email or call for quote.
  • Do the body parts come painted?

  • Yes, the rear sub-frame comes powder-coated gloss black to match the factory finish.
  • Can I run an inverted front suspension with the Naked Series conversion kit?

  • Yes, you can. We cannot guarantee our nacelles will fit up perfectly with them, but we are confident it would only be a minor adjustment if necessary to make the part fit.
  • Can I run a front lowering kit with the Naked Series kits?

  • Yes, any lowering kit will work. Also, our rear shocks are 1” height adjustable.
  • Can I convert my bike back to stock after installing a Naked Series kit?

  • Yes, Naked Series kits are bolt-on. You can return the bike to completely stock and use all the parts on another bike if desired. Or, convert back and forth from a performance bagger to racer style any time the mood hits.
  • Do I have to build the complete kit, or can I add as I go?

  • Our parts a designed to work on a stock bagger. You can buy 1 part at a time and gradually build a Naked Series conversion, or just use your favorite parts to build your bike – your way.
  • Can I put my saddlebags back on for trips after using the Naked Series conversion kits?

  • Absolutely, our rear sub-frame un-bolts in minutes and you can put your stock sub-frame rear fender and saddlebags back on for that long weekend run. It would take about an hour to convert it back to bagger.
  • Do the Naked Series conversion kits reduce the weight?

  • The full conversion is dramatically less heavy than a stock bagger. We weighed one of our builds and it came in at 383 lbs total weight, that’s using all Epic Parts. To give you an idea a stock Road King weighs approximately 836 lbs.
  • Do you have installing dealers for Naked Series kits and parts?

  • Yes. We have a network of authorized dealers and service facilities all over the world. Please contact us and we can place you with the nearest installing dealer.
  • Can I sell my stock take-off parts?

  • Yes, you can sell the stock parts and recover $2,000-$3,000 depending on condition and model.
  • Will the Naked Series front fender work with aftermarket front ends?

  • Yes, as long as it’s setup for stock style fender mounts. If not, the fender can easily be modified.

    Ignition, Electrical & Lighting

  • Does the ignition relocation kit use the factory style Road King or Softail ignition?

  • The Epic ignition relocation kit uses the factory style and you can also lock the ignition.
  • Can I run turn signals with the Epic Café Fairing?

  • We offer a headlight with the turn signals built-in. You can always run custom or aftermarket turn signals.
  • Does the Epic tail fairing have turn signals?

  • Yes, we offer an All-in-One LED light that runs across the back. Running/Brake, Left & Right Turn Signals.
  • Can I run side mount or custom turn signals on the rear of bike when installing a Naked Series kit?

  • Yes, you have many aftermarket companies that make cool turn signals.

    Frame & Suspension

  • Does the rear sub-frame come painted?

  • Yes, the rear sub-frame comes powder-coated gloss black to match the factory finish.
  • Can I run an inverted front suspension with the Naked Series conversion kit?

  • Yes, you can. We cannot guarantee our nacelles will fit up perfectly with them, but we are confident it would only be a minor adjustment if necessary to make the part fit.
  • Can I run a front lowering kit with the Naked Series kits?

  • Yes, any lowering kit will work. Also, our rear shocks are 1” height adjustable.
  • Does the License plate have a light?

  • Yes, the license plate light is built into our rear sub-frame and has a very powerful LED that is mounted at the perfect angle to light up the license plate.
  • Can I adjust the height of the 510 Series shocks?

  • Yes, the shocks are height adjustable 1"

    Wheels, Tires & Brakes

  • Do I have to change the wheels to use the conversion kit?

  • No, you can run stock wheels
  • Do I need new brake lines when installing a Naked Series conversion kit?

  • You don’t need new brake lines but, we do recommend swapping out with the snipper lines. This will hide the lines and give the bike a much cleaner look.
  • Are the knobby tires onlyfor off road use?

  • The Continental TKC 80 tires are for on-road and off-road.

    Fenders, Nacelles, Spoilers & Fairings/Cowlings

  • Do the body parts come painted?

  • No,the body parts come in a high-build primer which allows you to mock-up the parts and dial in to your liking and paint specifications. Need help finding a quality painter to give your custom ride the perfect finish? Give us a call! We have a network of qualified painters ready to go.
  • Do you offer painted parts?

  • Yes, we can provide a custom paint set for additional fee. Please email or call for quote.
  • Can I run an inverted front suspension with the Naked Series conversion kit?

  • Yes, you can. We cannot guarantee our nacelles will fit up perfectly with them, but we are confident it would only be a minor adjustment if necessary to make the part fit.
  • Can I run turn signals with the Duro Tracker Nacelle?

  • Yes, you can run OEM or any aftermarket Touring bike style.
  • Can I run turn signals with the Epic Café Fairing?

  • We offer a headlight with the turn signals built-in. You can always run custom or aftermarket turn signals.
  • Does the Epic tail fairing have turn signals?

  • Yes, we offer an All-in-One LED light that runs across the back. Running/Brake, Left & Right Turn Signals.
  • What do I do for a speedo?

  • We have a couple of options for speedo’s. You can use our Road King dash with OEM size speedo mount and indicator lights, or we make a mount for your cell phone if you are running our XXX Risers with your cell phone doubling as your GPS.
  • Can I ride a passenger with the Epic tail fairing?

  • Yes, the Epic sub-frame is fully supporting the tail section.
  • Does your Epic chin spoiler work with stock crash bar?

  • We don’t currently offer a production version to work with the crash bar, but with one cut across the top it will work. You will need to cut about 4” off the top and drill a ¼” hole for top center mount. We have done them for customer bikes.

    Accessories

  • Does the Epic license plate have a light?

  • Yes, the license plate light is built into our rear sub-frame and has a very powerful LED that is mounted at the perfect angle to light up the license plate.
  • What do I do for a speedo?

  • We have a couple of options for speedo’s. You can use our Road King dash with OEM size speedo mount and indicator lights, or we make a mount for your cell phone if you are running our XXX Risers with your cell phone doubling as your GPS.
  • Does Epic Moto Co offer a passenger seat?

  • Yes, our seats are all hand-made by HIX Designs. Or you can have a seat maker near you make a seat.
  • Does Epic Moto Co offer a passenger seat?

  • Yes, our seats are all hand-made by HIX Designs. Or you can have a seat maker near you make a seat.
  • Do I need wire extensions for the Epic Moto bars?

  • In most cases you won’t need extensions but if you are running taller risers than the Epic 3” it could be possible.

    Performance & Riding

  • Can I ride a passenger with the Epic tail fairing?

  • Yes, the Epic sub-frame is fully supporting the tail section.
  • Do the Naked Series conversion kits reduce the weight?

  • The full conversion is dramatically less heavy than a stock bagger. We weighed one of our builds and it came in at 383 lbs total weight, that’s using all Epic Parts. To give you an idea a stock Road King weighs approximately 836 lbs.
  • Are the knobby tires only for off road use?

  • Epic Moto Co offers an axle lock for Harley Davidson bikes to reduce back-end push and wobble. The axle locks enhance control and reduce premature failure of critical parts such as brakes, tires, wheels, belts and bearings.

    Ordering & Shipping

  • Do I need an account to order?

  • No, you can place an order as a guest
  • How do you ship my order?

  • We ship UPS, USPS, Freight and Global shipping
  • How do you calculate shipping for my order?

  • Shipping is calculated by our shipping partners based on your address.

    Dealer Information

  • How do I become an authorized Epic Moto Co dealer?

  • Fill out our dealer application and submit it for processing we typically have you setup within 24 hours.
  • Where can I find an authorized Epic Moto Co dealer?

  • Send us an email or call for dealers near you.

    Manage My Account

  • How do I open an account?

  • Click the login link in the upper left comer of the website to create account.
  • I forgot my password.

  • Click forgot password link on the login page.

    Troubleshooting

  • What if my parts don’t fit?

  • Please give us a call or send an email to support@epicmotoco.com most of the time it just understanding the parts fitment. If we do have an issue we will send you a new part.